Rubber manufacturing demands precision at every stage—from raw compound preparation to finished product inspection. Hammer-IMS delivers advanced, non-nuclear millimeter wave measurement solutions that provide contactless thickness profiling, basis weight analysis, and real-time process feedback for rubber producers worldwide. Reduce material waste, tighten tolerances, and ensure consistent quality with technology trusted across global industrial operations.
Comprehensive inline and offline measurement solutions tailored for rubber and elastomer manufacturing processes.
Measure rubber sheet and profile thickness without contact using M-Ray millimeter wave technology. Achieve accurate readings across multiple centimeters of material thickness while maintaining clean, non-nuclear operation on live production lines.
Multifunctional millimeter wave technology enabling dimensional measurement, displacement tracking, and material characterization at multiple kHz rates. Ideal for highly dynamic rubber extrusion and calendering environments requiring fast, reliable data.
End-to-end Marveloc-CURTAIN system installations for rubber production lines, including upgrades to existing setups. Multi-sensor head configurations provide full cross-machine coverage and detect local deviations tied to individual extrusion screw bolts.
A compact, non-nuclear OEM sensor module for machine builders and integrators adding thickness or basis weight measurement to rubber processing equipment. Small form factor with full API support enables seamless product integration.
Monitor rubber production quality remotely via the Hammer-IMS IoT app. Access real-time measurement data, production trends, and analytics from any location to support smart factory operations and continuous process improvement.
Book a 30-minute introduction to Hammer-IMS measurement solutions with a dedicated regional specialist. International and North America teams are available to demonstrate how the technology applies to your specific rubber production challenges.
Rubber production tolerances leave little room for error—over-gauge material wastes compound, while under-gauge product fails performance specs. Hammer-IMS M-Ray millimeter wave technology delivers contactless, non-nuclear thickness and basis weight measurement directly on the production line, operating at up to 3 kHz for lines running at high speed. With multi-sensor cross-machine coverage and closed-loop feedback capability, manufacturers across Europe, Asia-Pacific, and North America consistently reduce scrap, tighten thickness margins, and run leaner without sacrificing quality.
See how global rubber and materials manufacturers have improved quality and reduced waste with Hammer-IMS.
"Sustainability is always a consideration for us. In our search for alternatives to radioactive source machines, we discovered the remarkable flexibility of Hammer-IMS. These solutions not only align with our objectives but also aid in crafting personalized, tailored solutions to fit our needs."
"Sustainability is always a consideration for us. In our search for alternatives to radioactive source machines, we discovered the remarkable flexibility of Hammer-IMS. These solutions not only align with our objectives but also aid in crafting personalized, tailored solutions to fit our needs."
"Sustainability is always a consideration for us. In our search for alternatives to radioactive source machines, we discovered the remarkable flexibility of Hammer-IMS. These solutions not only align with our objectives but also aid in crafting personalized, tailored solutions to fit our needs."
From non-nuclear sensor technology to global service coverage, Hammer-IMS brings measurable advantages to every production line.
M-Ray millimeter wave sensors are entirely non-radioactive, enabling safe 24/7 operation without personnel restrictions or regulatory overhead.
Closed-loop integration delivers live measurement data directly to extrusion and calendering controls, allowing instant process corrections on the line.
With operations spanning Belgium, Germany, France, the Netherlands, Australia, Japan, and a North America team, support is always within reach for your facility.
The multi-sensor head platform scales from single-point to full cross-machine coverage, detecting local thickness deviations across the entire rubber sheet width.
Specialists in industrial measurement innovation serving manufacturers worldwide.
Hammer-IMS develops and delivers innovative, high-tech quality and process control solutions with a clear focus on non-nuclear measurement technologies. The company serves manufacturers across the textile, nonwovens, plastics, rubber, construction materials, automotive, and medical device sectors. With deep expertise in millimeter wave M-Ray technology, Hammer-IMS has built an international footprint spanning Europe, Asia-Pacific through a strategic partnership with ADSTEC in Japan, and North America—supporting rubber and materials producers wherever they operate. The company's mission is to help customers optimize production, reduce material waste, and promote sustainability through accurate, non-destructive inline measurement. With a vision of seamlessly integrated quality control, Hammer-IMS continues to lead the industry through constant innovation and customer-centric product development.
Hammer-IMS uses proprietary M-Ray millimeter wave technology—the same electromagnetic wave spectrum as mobile communications. This enables contactless, non-nuclear thickness and basis weight measurement of rubber sheets and profiles. The technology operates at up to 3 kHz, is entirely non-radioactive, and can measure materials up to 30 centimeters thick without any physical contact with the product.
Speak with a Hammer-IMS specialist to find the right solution for your production line.
Hammer-IMS supports rubber and industrial manufacturers across Europe, Asia-Pacific, and North America.
6+ Countries
Regions Served
Mon–Fri
Availability
Spartanburg, SC
North America Hub
Contact our international or North America team to confirm coverage for your facility.
Fully non-radioactive M-Ray technology for safe industrial use
IoT-enabled systems with closed-loop and remote monitoring support
International reach validated through strategic partners including ADSTEC
Tell us about your production process, material specifications, and quality challenges. A Hammer-IMS specialist will respond with a solution recommendation and demo availability.
For immediate assistance, feel free to give us a direct call at +32 11 36 55 01.
For immediate assistance, feel free to give us a direct call at +32 11 36 55 01.